File Drops
177 readers
1 users here now
A place for file drops and active projects announcements.
founded 2 months ago
MODERATORS
1
2
Posted the final update for these. +2 magazine extensions for the P10 C! They sit flush with the grip and come in 3 different sizes to match your back strap. They use the stock steel retaining plate from the OEM +2 extensions, so no need to buy anything to install them.
They're solid and held up to 2 IDPA matches and a Steel Challenge.
Find them on my Odysee page under the same name.
3
Out now. Download here: https://odysee.com/@FoapsFiles:2/PLASTICATTO-DD19.2:b?r=FUcLX11Yz1wjXd5vbnzmFPoTbeXLSAo2
4
https://odysee.com/M1922-Hotchkiss-holder:2
Hey yall,
If people haven't seen, Apex has a cool deal on M1922 parts kits. Unfortunately, looking into it led me to seeing that someone is producing a metal receiver on Weapons Guild, and a couple images of 3D printed receiver holders looked really damn cool
I did some digging and could not ever find the STLs or anything on WG like people on Reddit said, but I did find an older forum post with some drawings
Parts of the drawings were not fully dimensioned, and, of course, it is missing the front circle bit and probably another cut or two. I do not have my kit yet, and it won't be here for another week, but I at least wanted to make and post the "close enough(?)" version for now so people aren't getting molested by people selling these for seventy Washingtons
The main bits that I had to guess on were rounds and the fillet, as well as, of course, I forgot to round the corners on the bigger cut on the top
Some people warned on Reddit it MIGHT be classified as an MG since there's no special shit going on here, but either way, apparently the receiver is pressure-bearing so not a good idea to try and actually shoot it like this
I will hopefully still have the time, drive, and motivation to update the file once I get my parts kit in. If someone beats me to it then even better
This is my first actual contribution and "build" and post and such, so if I did something dumb feel free to call me a retard
Either way, at the least, I just wanted to have this option out there for somebody who may need it and can fill in the blanks. Sounds like people were paying out the ass for these in PLA
5
This is grip inserts for "testing-rest-not-ransom v2" testing device. Perhaps could work with original "Ransom Rest", but not tried. Included linear puller adapter and original FGC9 pistol grip. https://odysee.com/@clearview4851:e/Grip-inserts-AR15-FGC9mkII-for-testing-rest:7
6
https://odysee.com/@clearview4851:e/notachi-update-rc4:e
- default is printed only version. Steel parts and related the lower frame and the cylinder included for reference.
- printing and post-print processing optimizations.
- change tension spring pins positions (tension distance increased twise), now the hammer easely sets almost any primer. Drawback is that dowel nut is not anymore held by a M4 bolt. Instead the upper tension springs pin going trough it. This is very loose, and I recomment to put some JBwield there. but I'm using as is without any noticeable issues.
- hammer releasing changed (finally!) The trigger now is much easyer at break. Tho still quite heavy at pull.
- the lower tension springs pin changed to m3 bolt. This is workaround to the pin walking out. If your pin can stay at it's place - good for you. The frame covers without bolt head and nut cutouts included.
- included grips inserts for the Testing-Rest-Not-Ransom.
7
Quick disconnect options added in this new update. Printed QD and Hyperion2A Heatsert versions as well as left and right hand versions available for all 3 varied degrees.
Download here: https://odysee.com/@FoapsFiles:2/EmSix-Folding-Buffer-Tubes:c?r=FUcLX11Yz1wjXd5vbnzmFPoTbeXLSAo2
8
You like HK? I like HK. Here's some handguards for your wannabe 22lr HK. Two lengths included. One for a tucked 4.5" barrel and an untucked 9" barrel. These were heavily inspired by the Bowden Tactical AR-V handguards. Kudos to them and their design. Makes me rock solid.
Stay safe and happy plinking!
Download here: https://odysee.com/@FoapsFiles:2/deAR22-AR-V-Style-Handguard:f?r=FUcLX11Yz1wjXd5vbnzmFPoTbeXLSAo2
9
10
I released on odysee not too long ago, and I was hoping to give this concept some attention which is why im posting it here. I had very little free time available to work on this idea and used pretty much all of it on this. I started work on this because I unironically got this from a dream after tinkering with the 43R printed casings.
I didn’t get a chance to print the modelo polylactico, so I ended up adapting the Harlot to chamber this cartridge design since I already had one on hand. The issue is, even after reworking most of it in CAD, the Harlot’s geometry tended to shear the rim off the printed cases—both the original 43R and this new variant. Between the frustration, limited budget, and lack of time, I decided to release it after about two weeks of tinkering.
11
12
One peice, no hardware, 1/2"x28 threads. Up now on my channel.
Download: https://odysee.com/$/download/deAR22-Komodaru-Flash-Cans/225cd548a3b77129cfbc4bf968f1180be560a1ae
View my other releases: https://odysee.com/@FoapsFiles:2
13
14
V2 of the "testing-rest-not-ransom". Now with the linear trigger puller. Also added bowden cable pulling lever.
https://odysee.com/@clearview4851:e/testing-rest-not-ransom-v2:0
15
Created a +2 mag extension for my plasticatto build. This is a 31mm ish extension with a large baseplate to limit it to +2 rounds. I limited it here because I know the factory Glock mag springs will work with this.
This should fit all factory Glock 17/34 mags.
These are available on my Makerworld profile along with a few other accessories that might suit your needs.
16
cross-posted from: https://forum.guncadindex.com/post/8661
Hot off of Fusion360 comes the HK Stock which is a stock remix of the brace included in the DB9 Alloy release file. Features a TPU butt pad for your pleasure.
THIS WILL MAKE YOUR PISTOL AN SBR. BE SURE TO FOLLOW ALL LOCAL, STATE, AND FEDERAL LAWS AND REGULATIONS.
Enjoy
17
BLC and Imposterarms proudly present: The Warden-308
Your new favorite pump action is here and its chambered in 308. This design uses manufactured parts requiring a 308 barrel, firing pin, bolt head, gas block, and AR15LPK. All other parts are PLA+ friendly printed parts utilizing common hardware store nuts/bolts/rods.
We would love to see your builds shared on 3D2A, Guncadindex, or any of the BLC socials. Find BLC on Element for any questions or feedback
Shout out to MiddletonMade and the Apple Pie for the design inspiration.
Much appreciation for the testing and contributions from the team of testers at the Black Lotus Coalition
https://odysee.com/@ImposterArms:7/Warden-308-VId:c?r=DVWn6T9kXQi2ECFPJ2XbTdnrAMEK1ggW
18
A jig to clamp around your DB Alloy so you can re-drill the holes for FCG after filling them. Mine got a bit wallowed out and loose, and instead of printing a whole new lower I made this jig.
Tested on the 5.7, should fit others?
Get it here: https://odysee.com/@sado:9/DBAlloyFCGDrillJig:d
20
Get it here: https://odysee.com/@sado:9/p90magloader:2
Demo here: https://odysee.com/@sado:9/P90MagloaderDemo:d
Because thumbs matter.
