Help & Support

185 readers

26 users here now

Post here if you have general questions concerning GunCAD, printing, or otherwise fabricating DIY firearms. Newbies are welcome, but users are encouraged to read Ctrl+PEW's Getting Started Guide if they haven't already.

Shitty stock image may be changed at moderator discretion.

founded 2 months ago

MODERATORS

TheShittinator

ItsBildo

Alyosha

Decimator/DecimatAR with OEM barrel (self.help)

submitted 1 month ago by hogleg to c/help

8 comments fedilink hide all child comments

I have been incapable of finishing a decimator build with an OEM barrel; 2 different OEM barrels as a matter of fact.

I've reprinted the upper twice (once because I wasn't sure if I just really messed up the print, once for stripping barrel nut threads) and I've reprinted the barrel nut 3-4 times at this point.

I started this build just before fosscad was nuked, and since the Ark is back up (https://forum.guncadindex.com/c/ark@fosscad.io), I was able to see that there are threads where others have had this issue.

Has anyone overcome this issue personally? The build looks great and I love the AR fcg but I'm hitting a wall here. Should I just drill and pin the barrel nut with a couple of set screws?

you are viewing a single comment's thread
view the rest of the comments

[–] notsuspekt 1 points 1 month ago* (last edited 1 month ago) (1 children)

Join the DD rocketchat and talk to Decimal yourself, he's an awesome guy.

Before doing that, calibrate your printer. The upper/barrel/nut interface depends on some pretty narrow tolerances.

[–] hogleg 2 points 1 month ago (1 children)

Thanks! I'm dialed in on flow ratio, pressure advance, e-step, as far as I can tell and I've got several other successful prints. None of them using printed threads like this, though. I'll see if I can bend his ear about it.

[–] notsuspekt 1 points 1 month ago (1 children)

If I recall correctly, he oriented the barrel nut super weird, with the bore facing sideways. I did mine vertical and it threaded on fine but he had a good reason for that orientation.

Have you done dimensional calibration, like a calilantern?

[–] hogleg 2 points 1 month ago (1 children)

Yeah, I ran into the same thing with the orientation; got farther after orienting it vertically, but like you said, he had a reason for the original orientation.

And I have not done that; I've never even heard of the calilantern. I will for sure give that a go. Thanks!

[–] notsuspekt 1 points 1 month ago (2 children)

It helps a lot with threads, and under/over extrusion. If you need the files DM me, you're not supposed to share them cause OP has cancer and he sells them.

[–] hogleg 2 points 1 month ago

I appreciate it! I'll throw him a few bucks for his work and guide. Wouldn't want to see that become standard in fosscad or a lot more people would end up losing fingers, I think :p

[–] hogleg 1 points 4 weeks ago

Hey, thanks again for the assistance! I didn't get back to this for awhile; life things. I left an update up at the top for anyone in the future.