BLC and Imposterarms proudly present: The Warden-308
Your new favorite pump action is here and its chambered in 308. This design uses manufactured parts requiring a 308 barrel, firing pin, bolt head, gas block, and AR15LPK. All other parts are PLA+ friendly printed parts utilizing common hardware store nuts/bolts/rods.
We would love to see your builds shared on 3D2A, Guncadindex, or any of the BLC socials. Find BLC on Element for any questions or feedback
Shout out to MiddletonMade and the Apple Pie for the design inspiration.
Much appreciation for the testing and contributions from the team of testers at the Black Lotus Coalition
https://odysee.com/@ImposterArms:7/Warden-308-VId:c?r=DVWn6T9kXQi2ECFPJ2XbTdnrAMEK1ggW
Any plans for other calibers?
No plans from me. The AR10 bolt head will handle a variety of others but the problem will likely be overall length of the case and bullet. The front wall of the lower is as thin as I would trust. That being said, STEP files are included with the build, I would love to see multi caliber remixes if someone figures it out