General Discussion

423 readers

57 users here now

Discuss anything GunCAD related. If you need help, see /c/help. If you think you're discussing a thing a lot of the time, consider making your own separate community.

Abide by the global rules or be smitten.

Shitty stock image may be changed at moderator discretion.

founded 2 months ago

MODERATORS

TheShittinator

ItsBildo

Alyosha

Hybrid High Caliber Weapons (self.general)

submitted 2 months ago by sir_obitus to c/general

13 comments fedilink hide all child comments

I'm interested in helping research towards making higher-caliber weapons possible with fully DIY components. I'm still not that well versed in weapon design and I know many people here have more experience with converting components so the main thing I'd like to know is what limitations need to be overcome?

I have an idea for the ECM taper that may work but it's yet to be tested. The other complexity is the bolt carrier group and the locking mechanism but I think that can be made with guides. The other consideration is the gas system, a section could be attached to the gas port without welding with a clamp but then I'm not sure if direct impingement or a piston system is the way to go.

Any help is appreciated.

you are viewing a single comment's thread
view the rest of the comments

[–] Alyosha 2 points 2 months ago (1 children)

I recall that Jeffrod was working on a more precise method of ECM that may be similar to what you're describing. No idea where that ever landed.

There's a question I feel that should be asked more - why aren't chamber reamers used more widely as part of the "DIY barrel" process? Are these reamers unobtainable outside of the US? I recall looking at that a while ago and it did appear they could be shipped worldwide.

[–] sir_obitus 2 points 2 months ago

Seems like a high-risk item to purchase, higher-risk than any other bought component.